From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

You are watching: Why are the pings from pc0 to server0 not successful?

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 2 ExamChapter 2 ExamChapter 2 ExamOnline Test
Next Chapter
Chapter 3 ExamChapter 3 ExamChapter 3 ExamOnline Test 
2.2.2.4 Packet Tracer – Configuring IPv4 Static and Default Routes
2.2.4.4 Packet Tracer – Configuring IPv6 Static and Default Routes
2.2.5.5 Packet Tracer – Configuring Floating Static Routes
2.3.2.3 Packet Tracer – Troubleshooting Static Routes

What are two advantages of static routing over dynamic routing? (Choose two.)

Static routing is more secure because it does not advertise over the network.Static routing scales well with expanding networks.Static routing requires very little knowledge of the network for correct implementation.Static routing uses fewer router resources than dynamic routing.Static routing is relatively easy to configure for large networks.
Explanation:

Static routing requires a thorough understanding of the entire network for proper implementation. It can be prone to errors and does not scale well for large networks. Static routing uses fewer router resources, because no computing is required for updating routes. Static routing can also be more secure because it does not advertise over the network.

Refer to the exhibit. What routing solution will allow both PC A and PC B to access the Internet with the minimum amount of router CPU and network bandwidth utilization?


*
*
*
*
*
CCNA2 v6.0 Chapter 2 Exam 002


R1(config)# ipv6 route 2001:db8:32::/64 G0/0R1(config)# ipv6 route ::/0 G0/0 fe80::2R1(config)# ipv6 route ::/0 G0/1 fe80::2R1(config)# ipv6 route 2001:db8:32::/64 G0/1 fe80::2
Explanation:

To route packets to unknown IPv6 networks a router will need an IPv6 default route. The static route ipv6 route ::/0 G0/1 fe80::2 will match all networks and send packets out the specified exit interface G0/1 toward R2.

Consider the following command:

ip route 192.168.10.0 255.255.255.0 10.10.10.2 5

Which route would have to go down in order for this static route to appear in the routing table?

a default routea static route to the 192.168.10.0/24 networkan OSPF-learned route to the 192.168.10.0/24 networkan EIGRP-learned route to the 192.168.10.0/24 network
Explanation:

drop the packetsend the packet out interface Serial0/0/0send the packet out interface Serial0/0/1send the packet out interface FastEthernet0/0
Explanation:

When a static route is configured with the next hop address (as in the case of the 192.168.10.128 network), the output of the show ip route command lists the route as “via” a particular IP address. The router has to look up that IP address to determine which interface to send the packet out. Because the IP address of 10.0.0.6 is part of network 10.0.0.4, the router sends the packet out interface Serial0/0/1.

A network administrator has entered a static route to an Ethernet LAN that is connected to an adjacent router. However, the route is not shown in the routing table. Which command would the administrator use to verify that the exit interface is up?

show ip interface briefshow ip protocolsshow ip routetracert
Explanation:

The network administrator should use the show ip interface brief command to verify that the exit interface or the interface connected to the next hop address is up and up. The show ip route command has already been issued by the administrator. The show ip protocols command is used when a routing protocol is enabled. The tracert command is used from a Windows PC.

Consider the following command:

ip route 192.168.10.0 255.255.255.0 10.10.10.2 5

How would an administrator test this configuration?

Delete the default gateway route on the router.Ping any valid address on the 192.168.10.0/24 network.Manually shut down the router interface used as a primary route.Ping from the 192.168.10.0 network to the 10.10.10.2 addres
Explanation:

A floating static is a backup route that only appears in the routing table when the interface used with the primary route is down. To test a floating static route, the route must be in the routing table. Therefore, shutting down the interface used as a primary route would allow the floating static route to appear in the routing table.

Refer to the exhibit. The small company shown uses static routing. Users on the R2 LAN have reported a problem with connectivity. What is the issue?


R2 needs a static route to the R1 LANs.R1 and R2 must use a dynamic routing protocol.R1 needs a default route to R2.R1 needs a static route to the R2 LAN.R2 needs a static route to the Internet.
Explanation:

R1 has a default route to the Internet. R2 has a default route to R1. R1 is missing a static route for the 10.0.60.0 network. Any traffic that reached R1 and is destined for 10.0.60.0/24 will be routed to the ISP.

Which three IOS troubleshooting commands can help to isolate problems with a static route? (Choose three.)

show versionpingtracertshow ip routeshow ip interface briefshow arp
Explanation:

The ping, show ip route, and show ip interface brief commands provide information to help troubleshoot static routes. Show version does not provide any routing information. The tracert command is used at the Windows command prompt and is not an IOS command. The show arp command displays learned IP address to MAC address mappings contained in the Address Resolution Protocol (ARP) table.

An administrator issues the ipv6 route 2001:db8:acad:1::/32 gigabitethernet0/0 2001:db8:acad:6::1 100 command on a router. What administrative distance is assigned to this route?

0132100
Explanation:

The command ipv6 route 2001:db8:acad:1::/32 gigabitethernet0/0 2001:db8:acad:6::1 100 will configure a floating static route on a router. The 100 at the end of the command specifies the administrative distance of 100 to be applied to the route.

Refer to the exhibit. The network engineer for the company that is shown wants to use the primary ISP connection for all external connectivity. The backup ISP connection is used only if the primary ISP connection fails. Which set of commands would accomplish this goal?


ip route 198.133.219.24 255.255.255.252ip route 64.100.210.80 255.255.255.252ip route 198.133.219.24 255.255.255.252ip route 64.100.210.80 255.255.255.252 10ip route 0.0.0.0 0.0.0.0 s0/0/0ip route 0.0.0.0 0.0.0.0 s0/1/0ip route 0.0.0.0 0.0.0.0 s0/0/0ip route 0.0.0.0 0.0.0.0 s0/1/0 10
Explanation:

A static route that has no administrative distance added as part of the command has a default administrative distance of 1. The backup link should have a number higher than 1. The correct answer has an administrative distance of 10. The other quad zero route would load balance packets across both links and both links would appear in the routing table. The remaining answers are simply static routes (either a default route or a floating static default route).

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.

Why are the pings from PC0 to Server0 not successful?

The static route to network 192.168.1.0 is misconfigured on Router1.The static route to network 192.168.1.0 is misconfigured on Router2.​The static route to network 192.168.2.0 is misconfigured on Router1.​The static route to network 192.168.2.0 is misconfigured on Router2.​
Explanation:

Static routes should specify either a local interface or a next-hop IP address.

Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.

What IPv6 static route can be configured on router R1 to make a fully converged network?

ipv6 route 2001:db8:10:12::/64 S0/0/1ipv6 route 2001:db8:10:12::/64 S0/0/0ipv6 route 2001:db8:10:12::/64 2001:db8:10:12::1ipv6 route 2001:db8:10:12::/64 2001:db8:32:77::1
Explanation:

To reach the remote network, R1 will need a static route with a destination IPv6 address of 2001:db8:10:12::/64 and an exit interface of S0/0/1. The correct static route configuration will be as follows: ipv6 route 2001:db8:10:12::/64 S0/0/1.

See more: See Eye To Eye Or Eye-To-Eye, To See Eye To Eye Definition And Meaning


From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 2 ExamChapter 2 ExamChapter 2 ExamOnline Test
Next Chapter
Chapter 3 ExamChapter 3 ExamChapter 3 ExamOnline Test 
2.2.2.4 Packet Tracer – Configuring IPv4 Static and Default Routes
2.2.4.4 Packet Tracer – Configuring IPv6 Static and Default Routes
2.2.5.5 Packet Tracer – Configuring Floating Static Routes
2.3.2.3 Packet Tracer – Troubleshooting Static Routes